LibraZiK-3 - Documentation

Cette page est en lecture seule. Vous pouvez afficher le texte source, mais ne pourrez pas le modifier. Contactez votre administrateur si vous pensez qu'il s'agit d'une erreur.
**Installing LibraZiK-3 - method 3** (// [[:manuel:installer_librazik:install-live:en|page 1]] - [[:manuel:installer_librazik:install-live-2:en|page 2]] - [[:manuel:installer_librazik:install-live-3:en|page 3]] - **page 4**//)\\
//([[:manuel:installer_librazik:install-live-4|French version / Version française]])//

<note tip>This tutorial has been revised in November 2020 with **librazik3-20201104-en-amd64.iso**.</note>

====== Installing LibraZiK-3 permanently on an internal disk of your computer (continuation and end) =======

==== Settings of the package management tool ====
The installer now configures the software packages management system. The first question you may be asked is: "Use a network mirror?".

Select "Yes" here, then go and select the country where you are located, then **deb.debian.org**. This "deb.debian.org" is a service that automatically finds the mirror that responds the fastest, which is very useful so that you don't have to change the configuration every time you move around, or when your usual mirror has problems.



==== Installation of the GRUB boot loader ====
GRUB is in charge of showing you the different systems present on your disk when you start your computer.

{{ :manuel:installer_librazik:install-live-4/lzk3-live-install-en-1-31.png?direct&600 |LibraZiK-3 installer - Boot loader 1 - click to enlarge}}

Choose here the location where you want to place the GRUB boot loader.
<note important>Be careful not to put it of your Live (USB key, DVD,...) support ! Otherwise, you will need to plug this USB key or DVD "live" each time you want to start your **LibraZiK-3** ! m(</note>

{{ :manuel:installer_librazik:install-live-4/lzk3-live-install-en-1-33.png?direct&600 |LibraZiK-3 installer - Boot loader 2 - click to enlarge}}

Then wait for another progress screen that lasts a few tens of seconds.

{{ :manuel:installer_librazik:install-live-4/lzk3-live-install-en-1-34.png?direct&600 |LibraZiK-3 installer - Boot loader 3 - click to enlarge}}

==== Finishing the installation ====

The initial installation will soon be completed.

The next screen informs you that the installation is almost complete, click on "Continue" :

{{ :manuel:installer_librazik:install-live-4/lzk3-live-install-en-1-36.png?direct&600 |LibraZiK-3 installer - Information on the installation completion - click to enlarge}}

<note tip>**Important note:** contrary to what is written in the previous screen, do not remove your USB key now or the installation will not be completed. You will remove it when you restart your machine.</note>

This last progress screen shows you the latest cleaning steps of the installation. It will take a few tens of seconds:

{{ :manuel:installer_librazik:install-live-4/lzk3-live-install-en-1-37.png?direct&600 |LibraZiK-3 installer - Cleaning - click to enlarge}}

Then, the installer gives you the control of the "live" system back:

{{ :manuel:installer_librazik:install-live-4/lzk3-live-install-en-1-38.png?direct&600 |LibraZiK-3 installer - Back to the "Live" system - click to enlarge}}

<note tip>If you took screenshots during the installation, please copy them to an external support ((a USB key for example, but not the live one, an **other** USB key 8-))) if you want to keep them after rebooting the computer.</note>

==== Rebooting ====

Done! The **studio audio LibraZiK-3** is installed on your machine and you can reboot your system to start on it: //top menu -> System -> Shut Down... -> Restart//.

<note tip>Don't forget to remove your live media (USB key or DVD) when rebooting, otherwise it will reboot on the "live".</note>

During this first reboot, you will choose the "Debian GNU/Linux" option.



====== Perfecting the installation ======
After rebooting to **LibraZiK-3**, you can finish the installation :



==== Update ====
Do an update ((with the //top menu -> System -> Administration -> Synaptic Package Manager//)) __especially if you made an installation without an internet connection__ because this will allow you to get the last updates arrived since the building of the live ((Warning: this update may take time depending on your internet connection and the number of software packages to be updated)).



==== Installation of additional packages required ====
Install the following packages:
  * __librazik-theme-all__ (which should install __librazik-theme-grub__ and __librazik-theme-lightdm__)
  * __librazik-optimisations-all__ (which should install __librazik-optimisations-rtirq__, __librazik-optimisations-timers__ and __rtirq-init__)

<note>These packages will allow you to complete this initial installation of **LibraZiK-3**.</note>

<note important>Please note that you will need to restart the machine for this to take effect.</note>



====== Configurations of your LibraZiK-3 system ======

To finish installing your **studio audio LibraZiK-3**, you may want to add some [[manuel:configuration:en|configurations to your system]].
LibraZiK-3 - Documentation

Outils pour utilisateurs

Outils du site

Outils de la page
