All Projects

http://linuxmao.org/forumthread101859

https://filmulator.org/ Logiciel de montage vidéo.

• https://filmulator.org/
• https://github.com/CarVac/filmulator-gui
• http://phd-sid.ethz.ch/debian/filmulator/

À partir du GIT amont pour prise en compte de la traduction FR.

Voir https://github.com/PiOverFour/MPK-M2-editor/issues/3.

• https://github.com/brummer10/Mamba/releases/tag/v1.9
• https://github.com/brummer10/Mamba/releases/tag/v1.8
• https://github.com/brummer10/Mamba/releases/tag/v1.7

Correctifs :

• conserve max_loop_time lorsque le canal principal est supprimé
• synchronise le BPM avec le BPM du transport-jack
• règle des problèmes avec les Soundfonts qui ne suivaient pas les spécifications des GM
• problème d’échelle lorsqu’il est utilisé avec un gestionnaire de fenêtre “tilling”
• corrige le décalage d’octave dans l’éditeur de carte-clavier personnalisé

Ajouts :

• combo-box de sélection de SF dans la fenêtre des paramètres de Fluidsynth
• quelques améliorations de l’interface graphique
• implémente le glisser-déposer pour charger des fichiers MIDI ou Soundfont
• ajoute le support de la sortie MIDI ALSA.
• interconnexion jack/ALSA I/O

https://github.com/dagargo/microdude/

Version 2.1-0librazik1 dispo dans testers.
Retours bienvenus avant de la pousser dans users.

• https://github.com/iurie-sw/geonkick/releases/tag/v2.4.0
• https://github.com/iurie-sw/geonkick/releases/tag/v2.4.1
• https://github.com/iurie-sw/geonkick/releases/tag/v2.5.0

Regarder la possibilité de fabriquer également la version VST3 (dispo depuis la version 2.0.0). (plus supporté - voir issue 151 geonkick)

Une nouvelle série 4.19.0-12 de noyau est dans Debian stable.
Il est donc possible d’en faire des noyaux BL et RT.

• https://github.com/corrados/jamulus/releases/tag/r3_6_0
• https://github.com/corrados/jamulus/releases/tag/r3_6_1

• https://github.com/jackaudio/jack2/releases/tag/v1.9.18
• https://github.com/jackaudio/jack2/releases/tag/v1.9.17
• https://github.com/jackaudio/jack2/releases/tag/v1.9.16
• https://github.com/jackaudio/jack2/releases/tag/v1.9.15

Ceci est une tâche mère avec les tâches prêtes sur lesquelles je souhaite vraiment travailler pour cette publication de mi-novembre, et celles prêtes à être publiées.

Gros axe de travail :

• mise à jour des logiciels de fons [REPORTÉ À PLUS TARD]
• studio-control tâche #1154 [REPORTÉ AU MOIS PROCHAIN]
• vérifier la liste de logiciels tirés par le paquet librazik-logiciels-all [REPORTÉ AU MOIS PROCHAIN]
• liquidsfz et qliquidsfz tâche #1013 [REPORTÉ À PLUS TARD]
• paquets Librazik KDE tâche #1226 [REPORTÉ AU MOIS PROCHAIN]
• action-menu-audio-converter tâche #1227 [REPORTÉ AU MOIS PROCHAIN]

PS : mois précédent

Avant publication :

• refaire les paquets librazik-* si besoin (librazik-menu) [FAIT]
• faire un tour des pouets mastodon [FAIT]
• vérifier les liens dans le billet de blogue [FAIT]
• ajouter des captures d’écran dans le billet de blogue [FAIT]
• vérifier les numéros de version dans la liste de la page “paquets” [FAIT]

Publication :

• préparer la tâche pour le mois prochain [FAIT] mois prochain

Diffusion :

• relai sur les canaux IRC habituels [FAIT]
• https://mastodon.xyz/@LibraZiK/ [FAIT]
• https://framasphere.org/posts/ [FAIT]
• mégaphone linuxmao [FAIT]

• https://github.com/jack-mixer/jack_mixer/releases/tag/release-14
• https://librazik.tuxfamily.org/doc3/logiciels/jack-mixer

• https://github.com/sfztools/sfizz/releases/tag/0.5.0
• https://github.com/sfztools/sfizz/releases/tag/0.5.1
• https://librazik.tuxfamily.org/doc3/logiciels/sfizz

• https://github.com/sadko4u/lsp-plugins/releases/tag/lsp-plugins-1.1.26
• https://github.com/sadko4u/lsp-plugins/releases/tag/lsp-plugins-1.1.28
• https://github.com/sadko4u/lsp-plugins/releases/tag/1.1.29

https://github.com/olegkapitonov/KPP-VST3

https://github.com/elk-audio/mda-vst3

(était: “depuis git : Refaire une version depuis GIT pour avoir le modèle de XTuner.”)

Nouvelle version 0.10.0 : https://github.com/Houston4444/RaySession/releases/tag/v0.10.0

Une nouvelle série 4.19.0-11 de noyau est dans Debian stable.
Il est donc possible d’en faire des noyaux BL et RT.

• https://github.com/sjaehn/BSEQuencer/
• https://lists.linuxaudio.org/archives/linux-audio-dev/2020-September/037856.html

https://github.com/pdesaulniers/wolf-shaper/releases/tag/v0.1.8

https://github.com/brummer10/XTuner de brummer (guitarix), sous GPL2.
Support NSM.

Voir : https://aur.archlinux.org/packages/xtuner/.

https://github.com/Houston4444/ActionMenuAudioConverter

https://github.com/corrados/jamulus/releases/tag/r3_5_11 https://github.com/corrados/jamulus/releases/tag/r3_5_12

• https://github.com/brummer10/Mamba/releases/tag/v1.6

Hi

Mamba release v1.6 is out

Mamba is a Virtual MIDI keyboard with some extended, unique features.
Virtual MIDI Keyboard

Mamba comes with some predefined key-maps, qwertz, qwerty, azerty(fr) and azerty(be), but you could define your own with the included Key-map Editor as well. Beside the computer keyboard and mouse, Mamba supports jack MIDI in and ALSA (seq) MIDI in. Output goes to jack MIDI out. Every channel use it's own Colour to display the played Notes per channel.
16 Channel Live MIDI Looper:

To record a loop, press "Play" and then to start recording press "Record". To stop recording press record again. Playback will start immediately.

The first recorded channel will become the Master channel. This one set the time frame for all later recorded loops. For the Master Channel the recording time will be stretched/clipped to match the next full beat time point.

To record a new loop, switch to a other channel, select your instrument and press "Record" again to start recording.

The later recorded loops will be synced to the master loop. When the recording time extend the absolute Master loop time record will be switched off. Absolute time is not bound to the loop point, so you could record loops crossing it. You could as well stop recording by press "Record" again before the time expires.

Each Channel could be cleared and re-recorded separate at any time. even when you press "Record" on a already recorded channel, it will be cleared before recording starts.

You could record the connected input device or play the Keyboard itself.
MIDI File player

You could select a MIDI file with the File Selector. It will be loaded in the play buffer of the first channel, regardless how much channels it use. You could use then channel 2 - 16 to record your own playing into it. To play along with it you could use any channel. A loaded file will become the Master channel for the looper.

To save your work just go to Menu -> "File" -> "Save MIDI file as", select the path and enter a file name. If you don't give the usual file extension Mamba will add the extension .midi befor save it.
Fluidsynth

When you load a Sound-font via the Menu -> "Fluidsynth" -> "Load Sound-font" Mamba will start the Fluidsynth engine and do the needed connections so that you could just play along. Menu -> "Fluidsynth" -> "Settings" will pop-up a new Window were you could select the Instrument for the channel and do settings for Fluisynth Reverb and Chorus. All your Settings will be saved on exit, so on next start you could just play along.

Mamba is released under the BSD Zero Clause License license

The GUI is build on libxputty - A damn tiny abstraction Layer to create X11 window/widgets with cairo surfaces

https://github.com/brummer10/libxputty

To build Mamba from source, the following dependencies must be meat.

    libfluidsynth-dev
    libc6-dev
    libsmf-dev
    libcairo2-dev
    libx11-dev
    liblo-dev
    libsigc++-2.0-dev
    libjack-(jackd2)-dev
    libasound2-dev

So, here is the project page:

https://github.com/brummer10/Mamba

and here you'll find the last release:

https://github.com/brummer10/Mamba/releases/tag/v1.6

regards

hermann

• https://github.com/brummer10/Mamba/releases/tag/v1.5

Hi

Mamba release v1.5 is out

Mamba is a Virtual MIDI keyboard with some extended, unique features.

So it could load/play and save MIDI files, it visualize the played files on the keyboard, were it use a unique color for each channel. you could visualize a single channel, or all together at once.

It could record your playing and play it back as endless loop. You could record a loop for each channel while the other channels still play. Note, that the loops don't be synced. So this is not for composing classic music, but to create Psychedelic Trance floors. Truly you could save your work as MIDI file and rework it in the DAW of your choice.

It will record as well all incoming MIDI messages, so you could use it as well to record your external MIDI controller.

Mamba also includes support by fluidsynth, you could load a soundfont and directly play along.

It include controls for the fluidsynth reverb and chorus, and a selector to select a instrument/patch for each channel.

Mamba will keep it's settings, so once a soundfont is loaded, on the next start you could just play along with the keyboard. You could load a new soundfont at any time.

To use it as a plain MIDI keyboard again, you just need to exit fluidsynth via the menu and connect Mamba with the synth of your choice.

Mamba is released under the BSD Zero Clause License license 

The GUI is build on libxputty - A damn tiny abstraction Layer to create X11 window/widgets with cairo surfaces

https://github.com/brummer10/libxputty

To build Mamba from source, the following dependencies must be meat.

    libfluidsynth-dev
    libc6-dev
    libsmf-dev
    libcairo2-dev
    libx11-dev
    liblo-dev
    libsigc++-2.0-dev
    libjack-(jackd2)-dev

So, here is the project page:

https://github.com/brummer10/Mamba

and here you'll find the last release:

https://github.com/brummer10/Mamba/releases/tag/v1.5

regards

hermann

Ceci est une tâche mère avec les tâches prêtes sur lesquelles je souhaite vraiment travailler pour cette publication du 15 octobre, et celles prêtes à être publiées.

Gros axe de travail :

• finaliser la mise à jour des logiciels de rncbc
• new-session-manager tâche #1127

PS :

• mois précédent

Avant publication :

• refaire les paquets librazik-menu (et autres librazik-* si besoin)
• passer librazik-apt 3.03 dans users
• faire un tour des pouets mastodon
• vérifier les liens dans le billet de blogue
• ajouter des captures d’écran dans le billet de blogue
• vérifier les numéros de version dans la liste de la page paquets

Publication

• préparer la tâche pour le mois prochain tâche 1242

Diffusion :

• relai sur les canaux IRC @freenode : librazik, linuxmao, dogmazic, lad, lau, linuxmusicians, opensourcemusicians
• https://mastodon.xyz/@LibraZiK/
• https://framasphere.org/posts/
• mégaphone linuxmao

https://ardour.org/whatsnew.html

J’ai travaillé avec Hermann (brummer) ces derniers jours, et mamba (dans sa version 1.4) possède maintenant une interface localisée en français.

• https://github.com/brummer10/Mamba/releases/tag/v1.4

Inclus une rustine pour la gestion sous NSM

https://github.com/ahlstromcj/sequencer64/pull/192

À appliquer sur le paquet LZK-3.

https://github.com/hydrogen-music/hydrogen/releases/tag/1.0.1